| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Brad Goodmans latest archtop http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=1846 |
Page 1 of 1 |
| Author: | Brad Goodman [ Sat Apr 30, 2005 12:05 pm ] |
| Post subject: | |
Hi Guys, Here are some pictures of the last guitar I finished a couple of months ago. The specs are:Sitka top,quilted maple back and sides,curly hard maple neck,20 year old Honduran rosewood pickguard,tailpiece,heelcap,bridge and neck laminates,ebony headplates and fretboard, 8 line purfling with curly maple binding,Schaller machines w/ebony buttons,Kent Armstrong pickup and nitro finish. 
  |
|
| Author: | stan thomison [ Sat Apr 30, 2005 12:29 pm ] |
| Post subject: | |
Brad that is one beautiful guitar. Very classy |
|
| Author: | RCoates [ Sat Apr 30, 2005 12:48 pm ] |
| Post subject: | |
very nice! |
|
| Author: | Steve Kinnaird [ Sat Apr 30, 2005 1:12 pm ] |
| Post subject: | |
Brad, that's really nice. I like the maple on maple. How does it sound? Steve |
|
| Author: | Brad Goodman [ Sat Apr 30, 2005 11:11 pm ] |
| Post subject: | |
Steve, Like most of the guitars i have buit on commission I had it strung up in my shop for 2 weeks before shipping it off so what it sounded like is just a fading memory,but as I remember it had a nice "woody" tone and was quite loud as most of my guitars are. More importantly it's new owner loves the way it sounds. |
|
| Author: | Matt Gage [ Sat Apr 30, 2005 11:38 pm ] |
| Post subject: | |
Wow! Gorgous guitar Brad, I wanna build an arch top! |
|
| Author: | LanceK [ Sun May 01, 2005 12:40 am ] |
| Post subject: | |
DANG! 
|
|
| Author: | npalen [ Sun May 01, 2005 12:50 am ] |
| Post subject: | |
Brad Nice design on the tailpiece also. Is that a hinged or Sacconi style? Nelson |
|
| Author: | Don Williams [ Sun May 01, 2005 2:14 am ] |
| Post subject: | |
Wow ! That's pretty. Really nice proportions, and great choices all around. |
|
| Author: | Jeff Doty [ Sun May 01, 2005 3:23 am ] |
| Post subject: | |
Brad, That is a real beauty. The maple neck is gorgeous and a great match with the body. Fantastic work. Did you learn archtop building from someone, or on your own through trial and error? Jeff |
|
| Author: | Don A [ Sun May 01, 2005 9:10 am ] |
| Post subject: | |
Brad, it looks great! Just curious, do you use the flat Guild style heel on all of your guitars? |
|
| Author: | FrankC [ Sun May 01, 2005 9:19 am ] |
| Post subject: | |
Maple on maple..hmmm...i like. might have to try that one day. great work brad. its always nice for beginners, like me, to see stuff like this. gives me hope and makes me think the pile of scrap wood in the corner may not have died in vain 
|
|
| Author: | John Kinnaird [ Sun May 01, 2005 9:38 am ] |
| Post subject: | |
Real pretty Brad! I too like the maple on maple. Everything works. How about some more closeups? John |
|
| Author: | Brad Goodman [ Sun May 01, 2005 11:40 am ] |
| Post subject: | |
Thanks for the nice words! Nelson, The tailpiece design is neither sacconi type or hinged.What I do is bend a piece of brass(lacquered)at almost a right angle and screw it to the morticed tailpiece. I actually use machine screws and tap the ebony. It's a lot of work but I'm happy with it. Jeff,I am a certified graduate of the school of hard knocks! It's been trial and A LOT of error!! When I first got into archtop building I relied heavilly on Bob Bennedettos book,which I feel is one of the best recources around (for any type of guitar building). Don,I have carved this style of heel on my archtops for the last bunch but have done the more rounded type as well. I'm still not sure which one I like best. Frank, Nothing is in vain. I have always believed that you learn more from your mistakes than your successes. Just for the record my first 4 guitars collapsed! |
|
| Author: | Colby Horton [ Mon May 02, 2005 12:23 am ] |
| Post subject: | |
Beautiful!! I don’t think I could make one that good.
|
|
| Author: | EricKeller [ Mon May 02, 2005 8:26 am ] |
| Post subject: | |
[QUOTE=Brad Goodman] Frank, Nothing is in vain. I have always believed that you learn more from your mistakes than your successes. Just for the record my first 4 guitars collapsed! [/QUOTE] Were the plates too thin? I've heard that this is the most common mistake for beginners, and I believe it. I built a mandolin, and both the top and the back were too thin. Must have been a shock for you anyway, I admire your perserverance after early experiences like that. |
|
| Author: | D.L.Huskey [ Mon May 02, 2005 3:03 pm ] |
| Post subject: | |
Brad, Thats a really nice guitar. Maple on maple with a plain fret board, Class. |
|
| Author: | Brad Goodman [ Mon May 02, 2005 9:57 pm ] |
| Post subject: | |
Eric, The ones that collapsed ( almost thirty years ago) were flattops,among other things the plates were too thin. John, I found a few more pictures: 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|